Cobra Spectrum

The Cobra Spectrum is a flexible LED strip light that creates vibrant RGB illumination in the most intricate lighting spaces.

Product Specs

  • Power Output

    7.2W/m (12V)

  • Lumens

    150 lm/m

  • Colours Available

    RGB Variable

  • Warranty

    5 Years

  • Ingress Protection

    IP64

  • Max Series

    1.5 Metres

  • Dimensions

    8.0mm x 1.8mm x 5m Roll

  • Includes

    Available in 5 Metre Rolls

Create dramatic results every time, with the Cobra Spectrum LED strip light, the go-to for low profile channel letters and lightboxes.

The Cobra Spectrum’s flexible zig-zag design allows it to duck and weave around the tightest contours with ease. Connect to one of our RGB controllers to customise and control the colour and brightness of the LEDs. Cobra Spectrum is available in variable RGB, with an impressive 5 year warranty.

Find all the latest product specifications and guides below:

Units

, , ,

Colour

RGB

IP Rating

Product Type

LED Strip

Voltage

12V

Power Output

7.2 W/M

Features

Dimmable

Installation guide

1
Cut LED strip to required size, taking care to only cut at intervals marked on the product. Note the maximum series length to avoid voltage drop.
2
Ensure that your channel letter or application area is clean and free of debris. Remove adhesive liner from the back of strip and press flex strip into place.
3
Solder connecting ‘wire tails’ to terminals for connection to power supply, or for ‘bridging wires’ for linking of strip segments. Always ensure positive-positive and negative-negative connection.
4
Connect to RGB controller and power supply to test.

Warning

Risk of electrical shock. Please read these instructions completely and carefully. Disconnect power before servicing or installing product.

Frequently asked questions

Our Cobra Spectrum LED Strip Light has been designed for many indoor (IP22) and outdoor (IP64) lighting installations, and is excellent in the following applications:

  • Cabinet Lighting
  • Light Boxes
  • Channel Letters
  • Commercial Lighting
  • Indoor and outdoor applications
  • Backlit Installations
  • Dimmable (with controller)

Follow these steps on how to install the Cobra Spectrum LED Strip Light.

  1. Cut the Cobra LED strip to required size, taking care to only cut at intervals marked on the product. Note the maximum series length of 1.5m to avoid voltage drop.
  2. Ensure that your channel letter or application area is clean and free of debris. Remove the adhesive liner from the back of the strip and press into place.
  3. Solder the connecting ‘wire tails’ to terminals for connection to power supply, or to ‘bridging wires’ for the linking of strip segments. Always ensure positive-positive and negative-negative connection.
  4. Connect to an RGB controller and power supply to test.

We have a range of dimmable drivers and controllers, suitable for use with the Cobra Spectrum LED Strip Light.

Use our free online estimator tool, Bounce Wizard, to work out exactly how many LED Strip Lights you’ll need for your next LED lighting or signage project.

Use Bounce Wizard, our free online estimator tool, to work out how many Cobra Spectrum LED Strip Lights you’ll need for your next project.