Supaflex Colours

For bright and even lighting in a choice of red, green or blue, choose our Supaflex Colours LED strip light.

Product Specs

  • Colours Available

    Red 11.52 W/m (24V), Green/Blue 12.96 W/m (24V)

  • Warranty

    5 Years

  • Max Series

    Red 3.5 Metres, Green/Blue 4.5 Metres

  • Includes

    5 Metre Roll

Our versatile, cut-to-size Supaflex range was purpose-built for shopfitting and architectural lighting applications.

Experience high quality illumination and excellent electrical efficiency with the Supaflex Colours 24V LED strip light. Available in a choice of Red, Green or Blue, our Supaflex Colours LED strip can even be used outdoors as it’s rated IP67. When combined with Supachannel, our anodised aluminium LED diffuser channel, the Supaflex Colours becomes an all-in-one LED lighting solution.

Find all the latest product specifications and guides below:

Units

, , ,

Colour

BLUE, GREEN, RED

IP Rating

Product Type

LED Strip

Voltage

24V

Power Output

11.52 W/M

Features

Dimmable

Installation guide

1
Cut LED strip to required size, taking care to only cut at intervals marked on the product. Note the maximum series length to avoid voltage drop.
2
Solder connecting ‘wire tails’ to terminals for connection to power supply, or for ‘bridging wires’ for linking of strip segments. Always ensure positive-positive and negative-negative connection.
3
Apply glue to the inside of the end cap, then push it onto the LED strip, ensuring to wipe off any excess glue.
4
Use end cap with holes to seal wire tail. Wait for all glue to dry before powering on.
5
Ensure that your application area is clean and free of debris. Remove adhesive liner from the back of strip and press flex strip into place.
6
Connect to suitable power supply (and dimmer/controller if required) and test.

Warning

Risk of electrical shock. Please read these instructions completely and carefully. Disconnect power before servicing or installing product.

Frequently asked questions

Supaflex Colours has been purpose-designed for indoor and outdoor shopfitting and architectural lighting applications, providing 24V linear LED lighting up to a 3.5m run (Red) and 4.5m run (Green/Blue). Easily cut to your desired size, the Supaflex Colours is excellent in the following applications:

  • Cabinet Lighting
  • Light Boxes
  • Shopfitting
  • Architectural Lighting
  • Dimmable (with controller)

Follow these steps on how to install the Supaflex Colours LED strip light.

  1. Cut the LED strip to your required size, ensuring to only cut at marked intervals. Do not exceed the maximum series length to avoid voltage drop.
  2. Solder connecting ‘wire tails’ to terminals for connection to power supply, or to ‘bridging wire’ for linking strips together. Always ensure positive-to-positive and negative-to-negative connection.
  3. Apply glue to the inside of the end cap, then push the cap onto the LED strip, ensuring to wipe away any excess glue.
  4. Use the end cap with holes to seal your wire tail end. Wait for all the glue to dry before powering on.
  5. Ensure your application area is clean and free of debris, remove the adhesive liner from the back of the Supaflex strip and press into place.
  6. Connect to a suitable power supply, and dimmer/controller if required, and test.
  7. You can install the Supaflex Colours LED strip light in a continuous run for up to 3.5m (Red) and 4.5m (Green/Blue). Always check the max series to avoid a voltage drop.

Supaflex Colours Red, Green & Blue LED strip lights can be used in conjunction with our Supachannel aluminium LED channel diffuser range, for easy mounting and an all-in-one linear LED lighting solution.

We also have a range of dimmable drivers and controllers, suitable for use with the Supaflex range.

Use our free online estimator tool, Bounce Wizard, to work out exactly how many modules you need for your next LED lighting or signage project.

Use Bounce Wizard, our free online estimator tool, to work out how many Supaflex Colours LED strip light modules you’ll need for your next project.

product
Enquire about the Supaflex Colours
Discuss your Coloured LED strip light needs with our friendly team. Send through your signage artwork and we’ll happily provide a custom LED layout with pricing in 48-72 hours, or why not try Bounce Wizard, our free layout and estimator tool.