SupaCOB Premium Colours

SupaCOB Premium Colours
SupaCOB Premium Colours - Image 2
SupaCOB Premium Colours - Image 3
SupaCOB Premium Colours - Image 4
SupaCOB Premium Colours - Image 5
SupaCOB Premium Colours - Image 6

Light up to 5m in a single run, with SupaCOB Colours – Our dotless and dimmable strip light, in Red, Green & Blue.

Product Specs

  • Power Output

    10 W/m (24V)

  • Lumens

    Red & Green 100 lm/m, Blue 150 lm/m

  • Colours Available

    Red, Green, Blue

  • Max Series

    5 Metres

  • Ingress Protection

    IP22

  • Dimensions

    8mm x 2.3mm x 5m

  • Warranty

    5 Year Warranty

  • Includes

    5m Roll & Connectors

Our versatile cut-anywhere SupaCOB Colours LED Strip was purpose-built for shopfitting and architectural lighting applications.

Experience ultra-high colour rendering with a 90 CRI (Colour Rendering Index). This This high-efficiency 24V dotless and dimmable LED Strip Light is perfect for retail, commercial and residential spaces. The full SupaCOB Premium Range is available in Colours – Red, Green or Blue, Warm White (3000K), Natural White (4000K) and Pure White (5000K), plus RGB and RGBW variants, all with an impressive 5 year warranty.

 

Find all the latest product specifications and guides below:

Units

Colour

3000K, 4000K, 5000K
IP Rating

Product Type

LED Strip
Voltage

24V
Power Output

13 W/M
Features

Dimmable, Dotless

Installation guide

1
Measure and cut COB strip to required length. SupaCOB Premium Colours - cuttable every 50mm.
2
If required, select appropriate connector:
3
Insert COB strip(s) into the plastic connector slot(s) ensuring the correct polarities are aligned:
4
Once COB strip is inserted, use flat pliers to compress metal connectors into the plastic connector. When completed correctly, metal should sit flush in the plastic connector. (Test power connection before installation.)
5
Remove the d/s tape paper backing and install into Superchannel or intended surface. Ensure COB strip is stuck down flat and firmly.
6
Connect to appropriately sized transformer.

Warning

Risk of electrical shock. Please read these instructions completely and carefully. Disconnect power before servicing or installing product.

Frequently asked questions

SupaCOB Colours has been purpose-designed for indoor shopfitting and architectural lighting applications, providing 24V dotless linear LED lighting up to a 5m run. Easily cut to your desired size, the SupaCOB Premium 3000K is excellent in the following applications:

  • Cabinet Lighting
  • Light Boxes
  • Shopfitting
  • Architectural Lighting
  • Dimmable (with controller)

Follow these steps on how to install the SupaCOB Colours 24V LED strip light.

  1. Cut the LED strip to your required size, ensuring to only cut at marked intervals. Do not exceed the maximum series length to avoid voltage drop.
  2. Solder connecting ‘wire tails’ to terminals for connection to power supply, or to ‘bridging wire’ for linking strips together. Always ensure positive-to-positive and negative-to-negative connection.
  3. Apply glue to the inside of the end cap, then push the cap onto the LED strip, ensuring to wipe away any excess glue.
  4. Use the end cap with holes to seal your wire tail end. Wait for all the glue to dry before powering on.
  5. Ensure your application area is clean and free of debris, remove the adhesive liner from the back of the SupaCOB strip and press into place.
  6. Connect to a suitable power supply, and dimmer/controller if required, and test.
  7. You can install the SupaCOB Premium 3000K LED strip light in a continuous run for up to 5m. Always check the max series to avoid a voltage drop.

The SupaCOB Colours LED strip light can be used in conjunction with our range of dimmable drivers and controllers.

Use our free online estimator tool, Bounce Wizard, to work out exactly how many modules you need for your next LED lighting or signage project.

Use Bounce Wizard, our free online estimator tool, to work out how many metres of SupaCOB Colours LED strip you’ll need for your next project.

product
Enquire about the SupaCOB Colours Range
Discuss your LED strip light needs with our friendly team. Send through your signage artwork and we’ll happily provide a custom LED layout with pricing in 24-48 hours, or why not try Bounce Wizard, our free layout and estimator tool.
02 9517 3222 Contact Us

Related products

View All Products