Novaneon Reflex V1620

Faux-neon vertically flexible LED strip designed for signage and architectural lighting.

Product Specs

  • Power Output

    12W/m (12V)

  • Lumens

    1000 lm/m (White)

  • Colours Available

    2700K, 6500K, Red, Blue, Yellow

  • Warranty

    5 Years

  • Max Series

    5 Metres

  • Includes

    Available in 5 or 10 Metre Rolls

Novaneon Reflex V1620 is a vertically flexible outdoor LED strip light designed to emulate the look of traditional glass-moulded neon.

Suitable for signage/lettering applications as well as large-format architectural installations. Its silicone-based housing is UV stable, weathertight and highly flexible, perfect for outdoor projects.

  • Flexible vertical bending strip
  • Can be cut every 10cm
  • 72 LEDs per metre
  • UV resistant and salt mist proof.
  • Minimum bending diameter 10cm

Find all the latest product specifications and guides below:

Units

, , ,

Colour

2700K, 6500K, BLUE, GREEN, RED, Yellow

IP Rating

Product Type

Neonflex

Voltage

12V

Power Output

12 W/M

Features

Dimmable

Installation guide

1
Cut material to length required using Novaneon Shears (cut only at intervals marked on the side of the casing).
2
Install clear PC terminals to both ends of Novaneon to prevent glue leaking to LED units.
3
Choose Left or Right Side Connect and Insert Contact Strip: Insert Contact strip into cut end of Novaneon. Where the PCB is on the left side of the strip, use a left connector, where it is on the right side, use a right connector.
4
Slide Cover Over to Seal: Apply silicone glue to cut end of strip, and slide cover over. Next, apply silicone over the end of the cap and push metal ring over. Clean excess silicone with a clean cloth. Silicone will cure in 4 hours.
5
Install End Caps: Apply silicone glue to cut end of strip, and slide end cap over. Clean up excess silicone with a clean cloth. Silicone will cure in 4 hours.
6
Novaneon strip can be mounted using Aluminium Track or clear clips. When handling strip, take care to only bend horizontally and do not twist/stretch strip as this may damage internal components.

Warning

Risk of electrical shock. Please read these instructions completely and carefully. Disconnect power before servicing or installing product.