Cobra Plus

Our new zigzag LED strip features 120 LEDs per metre and can be cut at every LED. Its flexible design makes it easy to follow curves and intricate shapes, even in the tightest spaces.

Product Specs

  • Power Output

    7.2W/m (12V)

  • Lumens

    720 lm/m

  • Colours Available

    Red, Blue, 3000K, 4000K, 5000K, 6500K

  • Warranty

    5 Years

  • Ingress Protection

    IP64

  • Max Series

    1.5 Metres

  • Dimensions

    6.5mm x 1.8mm x 4m or 5m Roll

  • Includes

    3M Self-adhesive Tape

The Bounce Cobra Plus is a flexible LED strip-light with an impressive 120 LEDs per metre. It’s cuttable every 1 LED (8.3mm), meaning increased flexibility for your signage projects.

Purpose-built for creating impact, the zig-zag design allows Cobra Plus to duck and weave around the tightest of contours with ease, both vertically and horizontally. With a 120° beam angle, you can illuminate the most intricate and low profile channel letters and light-boxes with dramatic results.

Slim and compact – Cobra Plus  is ideal for light-boxes and channel letters. Available in Red, Blue, 3000k, 4000k, 5000k and 6500k with an impressive 5 year warranty.

Find all the latest product specifications and guides below:

Units

,

Features

Dimmable

Beam Angle

120°

Installation guide

1
Cut LED strip to required size, taking care to only cut at intervals marked on the product. Note the maximum series length to avoid voltage drop.
2
Ensure that your channel letter or application area is clean and free of debris. Remove adhesive liner from the back of strip and press flex strip into place.
3
Solder connecting ‘wire tails’ to terminals for connection to power supply, or for ‘bridging wires’ for linking of strip segments. Always ensure positive-positive and negative-negative connection.
4
Connect to suitable power supply (and dimmer/controller if required) and test.

Warning

Risk of electrical shock. Please read these instructions completely and carefully. Disconnect power before servicing or installing product.