Blade Bar

The 24V Blade Bar is our go-to, easy mount solution for side-lit illumination. Ideal for fabric faced lightboxes and displays.

Product Specs

  • Power Output

    10.0W / 20.0W (24V)

  • Lumens

    1050lm / 2100lm

  • Colours Available

    6500K

  • Warranty

    5 Years

  • Ingress Protection

    IP33

  • Dimensions

    250/500mm x 25.5mm x 23.6mm

  • Max Series

    10 Per Series / 5 Per Series

  • Includes

    Clip Connectors Included

The Blade Bar is our go-to solution for sidelight illumination of fabric face light-boxes and backlit displays.

Its integrated connector system and included mounting tape makes for a quick and tidy installation. Available in two sizes, the Blade Bar is perfect for backlit display cabinets and light-boxes 50-80mm depth.

Find all the latest product specifications and guides below:

Units

, , ,

Colour

6500K

IP Rating

Product Type

LED Bar

Voltage

24V

Power Output

10W, 20W

Features

Dimmable

product
Enquire about the Blade Bar
Need more info on our Blade Bar LED? Discuss your needs with our friendly team. Send through your signage artwork and we’ll happily provide a custom LED layout with pricing in 24-48 hours. Or why not try Bounce Wizard, our free layout and estimator tool.

Installation guide

1
Ensure lightbox surface is clean and free from debris. We recommend ensuring the internal surfaces are painted matte white to encourage illumination.
2
Using the supplied LED Layout, remove tape from the rear side and stick LED bars in place, using the supplied clips.
3
Secure the LED bars by gluing them in place.
4
Using Wago connectors, wire up the LED bars to the transformer, ensuring not to exceed the maximum series. Wire in parallel if required. Exceeding the maximum series will result in voltage drop.

Warning

Risk of electrical shock. Please read these instructions completely and carefully. Disconnect power before servicing or installing product.